US$97.99 ~ 127.99

Free Shipping

Happymodel Larva X 100mm Crazybee F4 PRO 2-3S 2.5 Inch FPV Racing Drone BNF w/ Diamond VTX Runcam Nano2 Camera


To confirm that this part fits your vehicle, please enter your vehicle's details below.

  • Year:


    • Make:


      • Model:


        • Submodel:


          • Trim:


            • Engine:


              • Clear All
              This part is compatible with 0 vehicle(s).
              Show all compatible vehicles
              This part is compatible with 1 vehicle(s) matching
              This part is not compatible with
              Recent searches

                • Year
                • Make
                • Model
                • Submodel
                • Trim
                • Engine

                  Happymodel Larva X 100mm Crazybee F4 PRO 2-3S 2.5 Inch FPV Racing Drone BNF w/ Runcam Nano2 Camera

                  Brand Name: Happymodel
                  Model: Larva X
                  Item Name: 100mm 2-3S 2.5 Inch FPV Racing Drone 
                  Wheelbase: 100mm

                  Size: 88x88x45mm (without propellers)
                  Weight: 50g (without battery)

                  Drone Version: BNF ( With Receiver & Without Battery)

                  Happymodel EX1103 7000KV Motor
                  Mode: EX1103
                  KV options: KV7000
                  Stator Diamter:11mm
                  Stator Length:3mm
                  Shaft Diameter: Φ1.5mm
                  Motor Dimension(Dia.*Len):Φ13.5x16mm
                   Crazybee F4 Pro V3  Flight Controller
                  (Frsky version) CRAZYBEE F4FR PRO V3.0 Firmware target: CrazybeeF4FR
                  (Flysky version) CRAZYBEE F4FS PRO V3.0 Firmware target: CrazybeeF4FS
                  (No RX version) CRAZYBEE F4 PRO V3.0 Firmware target: CrazybeeF4DX
                  MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
                  Sensor: MPU-6000 (SPI connection)
                  Board Size: 28.5x 28.5mm
                  Power Supply: 2-4S battery input (DC 7-17V)
                  Built-in 10A (each) Blheli_S 4in1 ESC Dshot600 ready
                  Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)
                  Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable)
                  No RX version need to add external Receiver
                  Built-in Betaflight OSD(SPI Control)
                  Built-in Current meter Max 70A
                  Current meter scale set to 470
                  Built-in 5V 1A BEC
                  Built-in voltage detection
                  Onboard 10A 4in1 ESC
                  MCU upgraded to EFM8BB21
                  Power supply: 2-4S LiPo/LiPo HV (7v/17v)
                  Con. Current: 10A
                  Burst Current: 12A (5S)
                  Support BLHeliSuite programmable
                  Factory firmware: F_H_40_REV16_5.HEX
                  Default protocol: DSHOT600
                  Onboard Frsky D8 Receiver Version
                  ( Internal Frsky NON-EU receiver Version)
                  SPI BUS receiver
                  Frsky D8/D16 switchable
                  Compatible Non EU transmitter both D8 and D16 mode
                  Channels: 8ch or 16ch
                  Failsafe support
                  No ground interference ( Transmitter and receiver 1 m from the ground): 300m
                  Internal Flysky Receiver Version SPI BUS receiver
                  Protocol: AFHDS and AFHDS-2A Switchable
                  Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
                  No ground interference ( Transmitter and receiver 1 m from the ground): 300m
                  Failsafe support
                  External TBS Crossfire Receiver version CRSF Protocol , Official TBS transmitter compatible
                  External DSMX Receiver version
                  Frequency range: 2.403-2.479Ghz
                  Input power: 3.3V — 5V
                  Response time: 22ms / 11ms
                  Resolution: 1024/2048
                  Display method: LED
                  Operating voltage: 3.3V
                  Working current: 60MA
                  Size: 18mm*13mm*5mm
                  Weight: 0.9 g
                  Antenna length: 30mm
                  Data format: Serial port
                  Protocol: DSM2/DSMX
                  Distance: no ground interference (1 m from the ground ) more than 300m
                  External Frsky RXSR Receiver version
                  Weight: 1.5g
                  Number of channels: 16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel)
                  Operating Voltage Range: 3.5V~10V
                  Operating Current:70mA@5V
                  Firmware Upgradable
                  Compatibility: FrSky X Series modules and radios in D16 mode 
                  Could support Frsky New ACCST Protocol ( Upgrade firmware) 
                  Happymodel Diamond_VTX
                  Output power: 25~200mw switchable
                  Frequency: 40CH
                  Input voltage: 3.3V 5.5V
                  Current consumption: 250mA~510mA(type)
                  Antenna: RG178 antenna
                  U.FL interface
                  Frequency: 5.8GHz 5bands 40 channels
                  With Raceband
                  Smartaudio ready
                  Weight: 3g without antenna
                  Video Output Size: VGA (640×480) 
                  Video Output format: NTSC
                  Record video size : 1280×720 @25FPS
                  TF Card support: Max.32G
                  Interface: JST SH1.0 3pin for Camera
                                  JST SH1.0 5pin for Connect with F3/F4 Flight controller
                  Compress Format: AVI
                  Runcam NANO2 FPV Camera
                  Model: Nano 2
                  Image Sensor: 1/3" CMOS
                  Horizontal Resolution: 700TVL

                  Lens: 2.1mm(M8) FOV 155°
                  Signal System: NTSC / PAL
                  S/N Ratio: >50dB
                  Electronic Shutter Speed: Auto
                  Auto Gain Control (AGC): Auto
                  Min. Illumination: 0.01Lux@1.2F
                  D-WDR: Auto
                  Day/Night: Color
                  Power: DC 3-5.5V
                  Current : 110mA@5V 120mA@3.3V
                  Housing Material: ABS
                  Net Weight: 3.2g
                  Dimensions: 14x14x16mm ( LxWxH)

                  Recommend Lipo Battery
                  ( All Version Don't Include) 
                  Recommend 2S 450mAh Lipo /  3S 300mAh/350mAh Lipo Battery

                  – New Crazybee F4 PRO V3.0 AIO Flight controller 2-4s Lipo Compatible
                  – Powerful and smoothly
                  – Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles
                  – Camera Angle adjustable
                  – VTX power switchable 25mw~200mw
                  – Smartaudio ready , change VTX bands, powers, channels via OSD
                  – Receiver option: Frsky D8/ Flysky / DSMX / Frsky RXSR/ TBS CRSF 
                  – Diamond VTX Ready
                  – Compatible both for 2-3S Lipo/LIHV

                  Package Included:

                  1X Larva X frame
                  1X Option1: Crazybee F4FR V3.0 PRO FC built-in Frsky NON-EU RX
                       Option2: Crazybee F4FS V3.0 PRO FC built-in Flysky RX
                       Option3: Crazybee F4FS V3.0 PRO FC with DSM2/DSMX RX
                       Option4: Crazybee F4 V3.0 with external Frsky RXSR receiver
                       Option5: Crazybee F4 V3.0 with external TBS Crossfire Nano RX
                  4X 1103 KV7000 motor
                  4X Micro Avan Rush Propeller 2.5 Inch ( 4 CW & 4 CCW)
                  1X Runcam Nano2 Camera
                  1X 5.8G 25-200mW VTX
                  1X Propeller disassemble tool
                  1X Screwdriver

                  Leave a Comment